Prices are tax included
Brakefluid-Tester Busching 100686
Warning: Last items in stock!
This handy brake fluid tester is suitable for determining the quality of DOT 3, DOT 4 and DOT 5.1 brake fluids. It measures the water content in the brake fluid and indicates the quality by means of three light-emitting diodes.
• Test classes: DOT 3, DOT 4, DOT 5.1
• Display: 3 LEDs (quality) 2 LEDs (class)
• Power supply: 1.5 V / AAA
• Break-resistant and acid-proof plastic
Open the cover of the brake fluid reservoir and pull off the cap of the tester. Now turn on the tester by briefly pressing the button. The test class can be set by holding down the key for longer. After the tester is set correctly, immerse the test probes completely in the brake fluid. The test result can be read off after about two seconds by the three LEDs which indicate the quality.
A functional test can be performed by holding the tester in a vessel with water. The test procedure is the same as for the brake fluid test. All diodes must light up.
• 1 x PenOhm incl. Protective cap
• 1 x 1.5V / AAA
BUSCHiNG Article no. 100686
Alligator Sens-It RS3 590914 for clamp-in...
Alligator Valve Kit Black 590908
Automotive Fuse-Tester Kunzer 7FPS01
Torque Wrench Hazet Stahlgruber Edition 20-200 Nm 1/2"
Kunzer Oilfilter-Toolkit 30-pcs. 7FL30
TPMS Retrofit-Kit for your motorbike
Laser-Thermometer with Beeper Busching 100439
Hand impact screwdriver SW-Stahl 04100L
Trailer-Tester 12V Busching 100478
Balance Weight Pliers Hazet 665
Ateq VT67 diagnostic tablet
Valve screwing tool with torque
Hex-Key-Set SW-Stahl 04210SB 1,5-10mm
Ateq VT36 Truck TPMS-Tool
Hazet 630-8 Double-Ring-Spanner-Kit 8 pieces